FYK 35 WDSquare flanged ball bearing unit with composite housing, extended inner ring and eccentric locking collar, ISO standards

FYK 35 WDSquare flanged ball bearing unit with composite housing, extended inner ring and eccentric locking collar, ISO standards

SKU: FYK 35 WDSquare flanged ball bearing unit with composite housing, extended inner ring and eccentric locking collar, ISO standards

These square flanged ball bearing units consists of an insert bearing mounted in a composite housing that can be bolted to a machine wall or frame. The units have eccentric locking collar and are intended for use in applications where the direction of rotation is constant. They are chemical resistant, lightweight and strong, and are developed for bearing arrangements that must operate reliably in difficult environments for extended periods without maintenance.

ID:116597

Technical Data
Reviews (0)

Compliance with standard	ISO
Purpose specific	For agricultural applications
Material, housing	Composite
Sealing, bearing	Seal on both sides
Sealing type, bearing	Contact, 5-lip
Sealing, unit	Optional end cover
Coating	Without

Dimensions

d	35 mm	Bore diameter
d₁	≈ 46.1 mm	Outer diameter of inner ring
d₂	51.1 mm	Outside diameter of locking ring
A	35 mm	Overall width
A₁	17 mm	Flange width
A₃	3.2 mm	Depth of centring recess
A₅	24 mm	Standout of end cover
B	37.6 mm	Width of inner ring
B₁	51.1 mm	Overall bearing width
B₄	6.75 mm	Distance from locking device side face to thread centre
D_b	90 mm	Top external diameter
D_c	106.4 mm	Diameter of housing centering recess
J	92 mm	Distance between attachment bolts
L	118 mm	Overall length
N	14.8 mm	Diameter of attachment bolt hole
s₁	32.3 mm	Distance from locking device side face to raceway centre
T	53.3 mm	Overall unit width

Calculation data

Basic dynamic load rating	C	25.5 kN
Basic static load rating	C₀	15.3 kN
Fatigue load limit	P_u	0.655 kN
Limiting speed		1 100 r/min
		Limiting speed with shaft tolerance h6

Mass

Mass bearing unit

0.76 kg

Mounting information

Set screw	G₂	M10x1
Hexagonal key size for set screw		5 mm
Recommended tightening torque for set screw		16.5 N·m
Recommended diameter for attachment bolts, mm	G	12 mm
Recommended diameter for attachment bolts, inch	G	0.5 in

Reviews

There are no reviews yet.

Be the first to review “FYK 35 WDSquare flanged ball bearing unit with composite housing, extended inner ring and eccentric locking collar, ISO standards”