F2B 104-RMOval flanged ball bearing unit with cast iron housing, narrow inner ring and set screw locking, North American standards

F2B 104-RMOval flanged ball bearing unit with cast iron housing, narrow inner ring and set screw locking, North American standards

SKU: F2B 104-RMOval flanged ball bearing unit with cast iron housing, narrow inner ring and set screw locking, North American standards

These oval flanged ball bearing units consists of an insert bearing mounted in a cast iron housing that can be bolted to a machine wall or frame. The units have set screw locking which makes them suitable for applications where the direction of rotation is constant or alternating, and they can be relubricated through a grease fitting in the housing. These units are especially suitable for bearing arrangements that operate under tough conditions with relatively heavy loads.

ID:115750

Technical Data
Reviews (0)

Compliance with standard	North American standard
Purpose specific	For material handling applications
Material, housing	Cast iron
Sealing, bearing	Seal on both sides
Sealing type, bearing	Contact, standard
Sealing, unit	Optional end cover
Coating	Without

Dimensions

d	31.75 mm	Bore diameter
d₁	≈ 46.1 mm	Outer diameter of inner ring
A	37.3 mm	Overall width
A₁	14.3 mm	Flange width
A₅	24.5 mm	Width including end cover
B	33 mm	Width of inner ring
B₁	33 mm	Overall bearing width
B₄	6 mm	Distance from locking device side face to thread centre
D_b1	92.1 mm	Top external diameter
H	155.6 mm	Overall height
J	130 mm	Distance between attachment bolts
L	92.1 mm	Overall length
N	14.3 mm	Diameter of attachment bolt hole
s₁	23.3 mm	Distance from locking device side face to raceway centre
T	46.3 mm	Overall unit width

Threaded hole
R_G	1/8-27 NPT	Housing thread for grease fitting
R₁	24.8 mm	Axial position of the housing thread
R_α	45 °	Angular position of the housing thread

Grease fitting
D_N	6.579 mm	Diameter of head sphere of grease fitting
SW_N	11.113 mm	Hexagonal key size for the grease fitting
G_N	1/8-27 NPT	Thread of grease fitting

Calculation data

Basic dynamic load rating	C	25.5 kN
Basic static load rating	C₀	15.3 kN
Fatigue load limit	P_u	0.655 kN
Limiting speed		5 300 r/min
		Limiting speed with shaft tolerance h6

Mass

Mass bearing unit

1.25 kg

Mounting information

Set screw	G₂	5/16-24 UNF
Hexagonal key size for set screw		3.969 mm
Recommended tightening torque for set screw		6.5 N·m
Recommended diameter for attachment bolts, mm	G	12 mm
Recommended diameter for attachment bolts, inch	G	0.5 in

Reviews

There are no reviews yet.

Be the first to review “F2B 104-RMOval flanged ball bearing unit with cast iron housing, narrow inner ring and set screw locking, North American standards”