Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| Outside diameter | D |
60 mm
|
|---|---|---|
| Height | H |
13 mm
|
| Outside diameter shaft washer | d1 |
≈ 60 mm
|
| Inner diameter housing washer | D1 |
≈ 42 mm
|
| Abutment diameter shaft | da |
min. 52 mm
|
|---|---|---|
| Abutment diameter housing | Da |
max. 48 mm
|
| Fillet radius | ra |
max. 0.6 mm
|
| Basic dynamic load rating | C |
25.5 kN
|
|---|---|---|
| Basic static load rating | C0 |
63 kN
|
| Fatigue load limit | Pu |
2.32 kN
|
| Reference speed |
5 000 r/min
|
|
| Limiting speed |
7 000 r/min
|
|
| Minimum load factor | A |
0.02
|
| Mass bearing (including seat washer where applicable) |
0.12 kg
|
Reviews
There are no reviews yet.