Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d |
6 mm
|
Bore diameter |
|---|---|---|
| D |
14 mm
|
Outside diameter |
| H |
5 mm
|
Height |
| d1 |
≈ 13.8 mm
|
Outside diameter shaft washer |
| D1 |
≈ 6.2 mm
|
Inner diameter housing washer |
| r1,2 |
min. 0.2 mm
|
Chamfer dimension washer |
| da |
min. 11 mm
|
Abutment diameter shaft |
|---|---|---|
| Da |
max. 9.5 mm
|
Abutment diameter housing |
| ra |
max. 0.2 mm
|
Fillet radius |
| Basic dynamic load rating | C |
1.78 kN
|
|---|---|---|
| Basic static load rating | C0 |
1.92 kN
|
| Fatigue load limit | Pu |
0.071 kN
|
| Reference speed |
17 000 r/min
|
|
| Limiting speed |
24 000 r/min
|
|
| Minimum load factor | A |
0.000019
|
| Mass bearing (including seat washer where applicable) |
0.0035 kg
|
Reviews
There are no reviews yet.