Double direction thrust ball bearings can accommodate axial loads in both directions, but they must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections, and many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d |
65 mm
|
Bore diameter |
|---|---|---|
| D |
140 mm
|
Outside diameter |
| H |
79 mm
|
Height |
| D1 |
≈ 82 mm
|
Inner diameter housing washer |
| B |
18 mm
|
Height shaft washer |
| r1,2 |
min. 1.5 mm
|
Chamfer dimension housing washer |
| r3,4 |
min. 1 mm
|
Chamfer dimension shaft washer |
| da |
80 mm
|
Abutment diameter shaft |
|---|---|---|
| Da |
max. 104 mm
|
Abutment diameter housing |
| ra |
max. 1 mm
|
Fillet radius housing |
| rb |
max. 1 mm
|
Fillet radius shaft |
| Basic dynamic load rating | C |
159 kN
|
|---|---|---|
| Basic static load rating | C0 |
390 kN
|
| Fatigue load limit | Pu |
13.7 kN
|
| Reference speed |
1 300 r/min
|
|
| Limiting speed |
1 800 r/min
|
|
| Minimum load factor | A |
0.79
|
| Mass bearing (including seat washer where applicable) |
4.94 kg
|
Reviews
There are no reviews yet.