These angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in only one direction. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are available with metric and inch boundary dimensions. Depending on the design and series, the bearings can be provided with chemical and corrosion resistance.
| d |
101.6 mm
|
Bore diameter |
|---|---|---|
| D |
152.4 mm
|
Outside diameter |
| H |
25.4 mm
|
Radial cross section |
| B |
25.4 mm
|
Width |
| d1 |
≈ 120.447 mm
|
Shoulder diameter inner ring |
| D1 |
≈ 133.553 mm
|
Shoulder diameter outer ring |
| D4 |
≈ 139.471 mm
|
Shoulder diameter outer ring |
|
12.7 mm
|
Ball diameter | |
|
2.032 mm
|
Maximum radius of shaft or housing fillet |
| Dynamic load rating, Kaydon, radial direction | CK |
27.9 kN
|
|---|---|---|
| Basic static load rating, radial direction | C0 |
42.2 kN
|
| Basic static load rating, axial direction | C0a |
122 kN
|
| Mass bearing |
≈ 1.64 kg
|
Reviews
There are no reviews yet.