Four-point contact ball bearings can accommodate radial, axial and moment loads simultaneously. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are available with metric or inch main dimensions. Depending on the design and series the bearings can be provided with chemical and corrosion resistance.
| d |
25 mm
|
Bore diameter |
|---|---|---|
| D |
65 mm
|
Outside diameter |
| H |
20 mm
|
Radial cross section |
| B |
20 mm
|
Width |
| d1 |
≈ 40 mm
|
Shoulder diameter inner ring |
| D1 |
≈ 50 mm
|
Shoulder diameter outer ring |
|
9.525 mm
|
Ball diameter | |
|
1.5 mm
|
Maximum radius of shaft or housing fillet |
| Dynamic load rating, Kaydon, radial direction | CK |
14.7 kN
|
|---|---|---|
| Basic static load rating, radial direction | C0 |
14.9 kN
|
| Basic static load rating, axial direction | C0a |
25 kN
|
| Basic dynamic load rating, moment | CM |
0.225 kN·m
|
| Basic static load rating, moment | C0M |
0.225 kN·m
|
| Mass bearing |
≈ 0.34 kg
|
Reviews
There are no reviews yet.