SIQG 200 ESRod end, requires maintenance, female thread with clamping screws
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The inner ring is extended on both sides. The bearing requires maintenance and can be relubricated via grease fitting in the housing and for sizes 16 and larger also via the shaft. The female thread is available with a left- (prefix SIL) or right-hand thread.
| Maintenance |
Relubrication required
|
| Sliding contact surface combination |
Steel/steel, standard
|
| Material, inner ring |
Bearing steel
|
| Material, outer ring |
Bearing steel
|
| Sealing |
Without
|
| Attachment feature, rod end shank |
Right-hand female thread and clamping screws
|
Dimensions
| d |
200 mm
|
Bore diameter |
|---|---|---|
| d2 |
max. 421 mm
|
Diameter head |
| B |
200 mm
|
Width inner ring |
| G |
M 160×4
|
Thread |
| C1 |
max. 165 mm
|
Width head |
| h1 |
390 mm
|
Height shank end face – centre rod end eye |
| α |
4 °
|
Angle of tilt |
| dk |
250 mm
|
Raceway diameter inner ring |
| d4 |
max. 221 mm
|
Housing diameter shank |
| l3 |
min. 161 mm
|
Length threat |
| l4 |
max. 623 mm
|
Length (height) housing |
| l7 |
min. 195 mm
|
Distance shank chamfer – centre rod end eye |
| N |
max. 323 mm
|
Width shank |
| N1 |
max. 106 mm
|
Thickness shank base for clamping bolts |
| r1 |
min. 1.1 mm
|
Chamfer dimension bore |
Bolts with internal hexagon
| Size bolt with internal hexagon |
M 30
|
| Tightening torque bolt with internal hexagon |
1 350 N·m
|
Calculation data
| Basic dynamic load rating | C |
2 120 kN
|
|---|---|---|
| Basic static load rating | C0 |
3 400 kN
|
| Specific dynamic load factor | K |
100 N/mm²
|
| Material constant | KM |
330
|
Mass
| Mass rod end |
165 kg
|
Related products
-
SI 8 ERod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The bearing requires maintenance and can only be relubricated from the side. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
-
SILKAC 6 MRod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
-
SIKAC 6 MRod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
-
SILKB 8 FRod end, maintenance-free, female thread
These SKF rod ends have an injection moulded sliding layer of PTFE FRP between the housing and the inner ring. This sliding contact surface combination is maintenance-free. The male thread is available with a left- (prefix SAL) or right-hand thread.View product
Reviews
There are no reviews yet.