SIQG 160 ESRod end, requires maintenance, female thread with clamping screws
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The inner ring is extended on both sides. The bearing requires maintenance and can be relubricated via grease fitting in the housing and for sizes 16 and larger also via the shaft. The female thread is available with a left- (prefix SIL) or right-hand thread.
| Maintenance |
Relubrication required
|
| Sliding contact surface combination |
Steel/steel, standard
|
| Material, inner ring |
Bearing steel
|
| Material, outer ring |
Bearing steel
|
| Sealing |
Without
|
| Attachment feature, rod end shank |
Right-hand female thread and clamping screws
|
Dimensions
| d |
160 mm
|
Bore diameter |
|---|---|---|
| d2 |
max. 328 mm
|
Diameter head |
| B |
160 mm
|
Width inner ring |
| G |
M 125×4
|
Thread |
| C1 |
max. 133 mm
|
Width head |
| h1 |
310 mm
|
Height shank end face – centre rod end eye |
| α |
4 °
|
Angle of tilt |
| dk |
200 mm
|
Raceway diameter inner ring |
| d4 |
max. 170 mm
|
Housing diameter shank |
| l3 |
min. 126 mm
|
Length threat |
| l4 |
max. 490 mm
|
Length (height) housing |
| l7 |
min. 145 mm
|
Distance shank chamfer – centre rod end eye |
| N |
max. 252 mm
|
Width shank |
| N1 |
max. 85 mm
|
Thickness shank base for clamping bolts |
| r1 |
min. 1 mm
|
Chamfer dimension bore |
Bolts with internal hexagon
| Size bolt with internal hexagon |
M 24
|
| Tightening torque bolt with internal hexagon |
710 N·m
|
Calculation data
| Basic dynamic load rating | C |
1 370 kN
|
|---|---|---|
| Basic static load rating | C0 |
2 200 kN
|
| Specific dynamic load factor | K |
100 N/mm²
|
| Material constant | KM |
330
|
Mass
| Mass rod end |
80 kg
|
Related products
-
SIKB 5 FRod end, maintenance-free, female thread
These SKF rod ends have an injection moulded sliding layer of PTFE FRP between the housing and the inner ring. This sliding contact surface combination is maintenance-free. The male thread is available with a left- (prefix SAL) or right-hand thread.View product
-
SILKB 6 FRod end, maintenance-free, female thread
These SKF rod ends have an injection moulded sliding layer of PTFE FRP between the housing and the inner ring. This sliding contact surface combination is maintenance-free. The male thread is available with a left- (prefix SAL) or right-hand thread.View product
-
SIKAC 5 MRod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
-
SILKAC 6 MRod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
Reviews
There are no reviews yet.