SA 80 ESRod end, requires maintenance, male thread
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The bearing requires maintenance and can be relubricated via a grease fitting in the housing and via the shaft. The male thread is available with a left- (prefix SAL) or a right-hand thread. Some sizes have different fitting dimensions (SAA series).
| Maintenance |
Relubrication required
|
| Sliding contact surface combination |
Steel/steel, standard
|
| Material, inner ring |
Bearing steel
|
| Material, outer ring |
Bearing steel
|
| Sealing |
Without
|
| Attachment feature, rod end shank |
Right-hand male thread
|
Dimensions
| d |
80 mm
|
Bore diameter |
|---|---|---|
| d2 |
max. 182 mm
|
Diameter head |
| B |
55 mm
|
Width inner ring |
| G |
M 80×4
|
Thread |
| C1 |
max. 48 mm
|
Width head |
| h |
295 mm
|
Height shank end face – centre rod end eye |
| α |
6 °
|
Angle of tilt |
| dk |
105 mm
|
Raceway diameter inner ring |
| l1 |
min. 147 mm
|
Length threat |
| l2 |
max. 389 mm
|
Length (height) housing |
| l7 |
min. 98 mm
|
Distance shank chamfer – centre rod end eye |
| r1 |
min. 1 mm
|
Chamfer dimension bore |
Calculation data
| Basic dynamic load rating | C |
400 kN
|
|---|---|---|
| Basic static load rating | C0 |
585 kN
|
| Specific dynamic load factor | K |
100 N/mm²
|
| Material constant | KM |
330
|
Mass
| Mass rod end |
14.5 kg
|
Related products
-
SALKAC 8 MRod end, requires maintenance, male thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The male thread is available with a left- (prefix SAL) or right-hand thread.View product
-
SAL 6 CRod end, maintenance-free, male thread
These SKF rod ends contain a spherical plain bearing with a steel/PTFE sintered bronze sliding contact surface combination. The bearing is maintenance-free. The male thread is available with a left- (prefix SAL) or right-hand thread.View product
-
SALKB 5 FRod end, maintenance-free, male thread
These SKF rod ends have an injection moulded sliding layer of PTFE FRP between the housing and the inner ring. This sliding contact surface combination is maintenance-free. The male thread is available with a left- (prefix SAL) or right-hand thread.View product
-
SAKAC 6 MRod end, requires maintenance, male thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The male thread is available with a left- (prefix SAL) or right-hand thread.View product
Reviews
There are no reviews yet.