SI 40 TXE-2LSRod end
SKF rod ends consist of an eye-shaped head with an integral shank that forms a housing for a spherical plain bearing. These rod ends are used in applications such as hydraulic cylinders, steering links, tie rods, or anywhere a precision articulation joint is required. SKF provides both rod ends that require maintenance and rod ends that are maintenance-free.
| Maintenance |
Maintenance-free
|
| Sliding contact surface combination |
Steel/PTFE fabric
|
| Material, inner ring |
Bearing steel
|
| Material, outer ring |
Bearing steel
|
| Sealing |
Seal on both sides
|
| Sealing type |
Triple-lip
|
| Attachment feature, rod end shank |
Right-hand female thread
|
Dimensions
| d |
40 mm
|
Bore diameter |
|---|---|---|
| d2 |
max. 94 mm
|
Diameter head |
| B |
28 mm
|
Width inner ring |
| G |
M 42×3
|
Thread |
| C1 |
max. 24 mm
|
Width head |
| h1 |
145 mm
|
Height shank end face – centre rod end eye |
| α |
6 °
|
Angle of tilt |
| dk |
53 mm
|
Raceway diameter inner ring |
| d4 |
≈ 58 mm
|
Diameter shank |
| l3 |
min. 65 mm
|
Length threat |
| l4 |
max. 194 mm
|
Length (height) housing |
| l5 |
≈ 25 mm
|
Length wrench flat |
| l7 |
min. 50 mm
|
Distance shank chamfer – centre rod end eye |
| w |
50 mm
|
Size wrench |
| r1 |
min. 0.6 mm
|
Chamfer dimension bore |
Calculation data
| Basic dynamic load rating | C |
280 kN
|
|---|---|---|
| Basic static load rating | C0 |
166 kN
|
| Specific dynamic load factor | K |
300 N/mm²
|
Mass
| Mass rod end |
2.3 kg
|
Related products
-
SI 10 CRod end, maintenance-free, female thread
These SKF rod ends contain a spherical plain bearing with a steel/PTFE sintered bronze contact surface combination. The bearing is maintenance-free. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
-
SIL 8 CRod end, maintenance-free, female thread
These SKF rod ends contain a spherical plain bearing with a steel/PTFE sintered bronze contact surface combination. The bearing is maintenance-free. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
-
SI 6 CRod end
SKF rod ends consist of an eye-shaped head with an integral shank that forms a housing for a spherical plain bearing. These rod ends are used in applications such as hydraulic cylinders, steering links, tie rods, or anywhere a precision articulation joint is required. SKF provides both rod ends that require maintenance and rod ends that are maintenance-free.View product
-
SIKAC 10 M/VZ019Rod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
Reviews
There are no reviews yet.