SIL 20 CRod end
SKF rod ends consist of an eye-shaped head with an integral shank that forms a housing for a spherical plain bearing. These rod ends are used in applications such as hydraulic cylinders, steering links, tie rods, or anywhere a precision articulation joint is required. SKF provides both rod ends that require maintenance and rod ends that are maintenance-free.
| Maintenance |
Maintenance-free
|
| Sliding contact surface combination |
Steel/PTFE sintered bronze
|
| Material, inner ring |
Bearing steel
|
| Material, outer ring |
Deep-drawing steel
|
| Sealing |
Without
|
| Attachment feature, rod end shank |
Left-hand female thread
|
Dimensions
| d |
20 mm
|
Bore diameter |
|---|---|---|
| d2 |
max. 54 mm
|
Diameter head |
| B |
16 mm
|
Width inner ring |
| G |
M 20×1.5
|
Thread |
| C1 |
max. 13.5 mm
|
Width head |
| h1 |
77 mm
|
Height shank end face – centre rod end eye |
| α |
9 °
|
Angle of tilt |
| dk |
29 mm
|
Raceway diameter inner ring |
| d4 |
≈ 28 mm
|
Diameter shank |
| l3 |
min. 30 mm
|
Length threat |
| l4 |
max. 106 mm
|
Length (height) housing |
| l5 |
≈ 16 mm
|
Length wrench flat |
| l7 |
min. 24 mm
|
Distance shank chamfer – centre rod end eye |
| w |
24 mm
|
Size wrench |
| r1 |
min. 0.3 mm
|
Chamfer dimension bore |
Calculation data
| Basic dynamic load rating | C |
31.5 kN
|
|---|---|---|
| Basic static load rating | C0 |
57 kN
|
| Specific dynamic load factor | K |
100 N/mm²
|
| Material constant | KM |
1 400
|
Mass
| Mass rod end |
0.35 kg
|
Related products
-
SI 6 CRod end
SKF rod ends consist of an eye-shaped head with an integral shank that forms a housing for a spherical plain bearing. These rod ends are used in applications such as hydraulic cylinders, steering links, tie rods, or anywhere a precision articulation joint is required. SKF provides both rod ends that require maintenance and rod ends that are maintenance-free.View product
-
SIL 8 ERod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The bearing requires maintenance and can only be relubricated from the side. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
-
SIKAC 8 MRod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
-
SIKAC 10 M/VZ019Rod end, requires maintenance, female thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.View product
Reviews
There are no reviews yet.