Stainless steel single row deep groove ball bearings provide greater chemical and corrosion resistance. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
| d |
3 mm
|
Bore diameter |
|---|---|---|
| D |
9 mm
|
Outside diameter |
| B |
2.5 mm
|
Width |
| d1 |
≈ 4.86 mm
|
Shoulder diameter |
| D1 |
≈ 7.2 mm
|
Shoulder diameter |
| r1,2 |
min. 0.2 mm
|
Chamfer dimension |
| da |
min. 3.8 mm
|
Diameter of shaft abutment |
|---|---|---|
| Da |
max. 7.4 mm
|
Diameter of housing abutment |
| ra |
max. 0.2 mm
|
Radius of shaft or housing fillet |
| Basic dynamic load rating | C |
0.325 kN
|
|---|---|---|
| Basic static load rating | C0 |
0.095 kN
|
| Fatigue load limit | Pu |
0.004 kN
|
| Reference speed |
140 000 r/min
|
|
| Limiting speed |
90 000 r/min
|
|
| Minimum load factor | kr |
0.03
|
| Calculation factor | f0 |
6.4
|
| Mass bearing |
0.0007 kg
|
| Dimensional tolerances |
Normal
|
| Radial run-out |
Normal
|
Reviews
There are no reviews yet.