Insert bearings are based on sealed deep groove ball bearings. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening two (set) screws on the inner ring, making it easy to mount.
| d |
0.472 in
|
Bore diameter |
|---|---|---|
| D |
1.575 in
|
Outside diameter |
| B |
1.079 in
|
Width of inner ring |
| C |
0.472 in
|
Width of outer ring |
| d1 |
≈ 0.953 in
|
Outside diameter of inner ring |
| B4 |
0.157 in
|
Distance face to thread centre |
| r1,2 |
min. 0.012 in
|
Chamfer dimension of inner ring |
| s1 |
0.626 in
|
Distance from locking device side face to raceway centre |
| Basic dynamic load rating | C |
2 149 lbf
|
|---|---|---|
| Basic static load rating | C0 |
1 068 lbf
|
| Fatigue load limit | Pu |
45 lbf
|
| Limiting speed |
9 500 r/min
|
|
|
Limiting speed with shaft tolerance h6
|
||
| Calculation factor | f0 |
13
|
| Mass |
0.265 lb
|
| Set screw | G2 |
M6x0.75
|
|---|---|---|
| Hexagonal key size for set screw | N |
0.118 in
|
| Recommended tightening torque for set screw |
35.403 lbf·in
|
Reviews
There are no reviews yet.